The reducer, like other equipment, has certain requirements for the use environment. Generally speaking, the allowable temperature range of the reducer working environment is between -40°C and 45°C. If it exceeds this range, it is likely to give The performance of the reducer has a certain negative impact. Note that if the temperature of the operating environment is lower than 0°C, we need to preheat the temperature of the lubricating oil to above 0°C. Temperature is a big factor affecting the service life of the reducer. If the operating temperature exceeds the limit working temperature for a long time, the aging of the insulating material will be accelerated, thereby greatly shortening the service life of the reducer. Therefore, during the operation of the reducer , if it is necessary to operate under the extreme working temperature, please take corresponding precautionary measures to reduce the damage to the reducer as much as possible. It is best not to use the reducer in an environment with a lot of dust to prevent the dust from entering and hindering the normal operation of the equipment. Once the dust enters the equipment, it will accumulate on the gears and other parts, causing wear and tear on the reducer. In addition, when the reducer is working, the working temperature of the lubricating oil should not exceed 90°C. If the temperature is too high, the viscosity of the lubricating oil will be reduced and the bearing capacity of the lubricating oil film will be reduced.